Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Plastic additives are added during the processing and use of plastic films because some of the inherent properties of resin or film products do not meet the requirements of the processing technology required, additives can change the processability; some materials processing properties Better, but the product performance is not up to the requirements, this also adds additives to change the performance of the product. The opener is one of the necessary additives for blown film. The following will be introduced in detail.
There are three kinds of open slip agent anti-blocking agents commonly used: oleic acid amide, erucamide, silica; in addition to additives, there are also open masterbatch and functional masterbatch such as smooth masterbatch.
Slip agent: Adding a smooth component to the film is like adding a layer of water between the two glasses, which makes it easy to slide the two layers of film, but it is difficult to separate them;
Opening agent: adding an opening agent or an open masterbatch to the film is as if the surface between the two glasses is roughened with sandpaper, so that it is easy to separate the two films, but it is difficult to slide;
Open masterbatch: the composition is silica (inorganic);
Slip masterbatch: ingredient amide (organic). The amide and the anti-blocking agent are added together to the masterbatch to make a content of 20 to 30%, which is an excellent open masterbatch product.
Introduction of three slip agents
1. Oleic acid amide:
Oleic acid amide, also known as oleamide, is added in an amount of 0.1-0.15% and must be added in the form of a mixture or masterbatch at the processing plant to ensure a uniform smoothing effect.
It can be used in polyethylene film to reduce the friction between the inner friction film and the conveying device during processing, and it is easy to release the mold, thereby increasing the yield and improving the surface gloss of the product. Oleic acid amide has a good effect on PE opening, but it has a large taste and a high precipitation, which affects corona and printing, especially for temperature requirements, and the amount used in summer and winter is different. In general, oleic acid amide migrates to the surface quickly, but the long-term friction coefficient of erucamide is lower than that of oleic acid amide, and it is better than the thermal stability of oleic acid amide.
2. Erucamide
Can be used as plastic film such as CPP, BOPP, LDPE, LLDPE, EVA, PVC, PVDF, PVDC, PU and metallocene polyethylene. By reducing the dynamic and static friction coefficient of the surface of the product (film or sheet), the film is easy to process and the packaging work efficiency is increased by about 0.12%.
The erucamide has a strong slippery property, a small amount of precipitation, a high temperature resistance, and is not easily yellowed, and has a distinct advantage over oleic acid.
As the opening agent of BOPP, the packaging speed can be as high as 500-800 packs per minute, and the friction factor must be ≤0.2. Only the addition of erucamide (about 0.12%) can obtain accurate static and dynamic friction factors.
In addition to being used alone, it is also possible to produce a PP inflation film which is highly demanding in terms of slipperiness. It can be used in combination with erucamide and oleic acid amide for better results.
3, SiO2 anti-blocking agent
The opening agent can well maintain the high gloss of the film, has strong anti-blocking property and dispersibility, can be uniformly dispersed in the film, and forms many fine and hard protrusions on the surface of the film, thereby reducing the film. The contact area between the two sides achieves the purpose of reducing the friction coefficient of the film surface, making the film easy to open, and at the same time, due to the presence of these protrusions, the outside air can easily enter between the two films, avoiding the film laminated on the two layers. A vacuum is formed between them to prevent the film from sticking.
Can be used for PP, PE and other film products.
Opening agent selection
The choice of amide and silica is very important in the open slip masterbatch.
The quality of the amide is uneven, which causes the effect of the masterbatch on the film to occur. For example, the taste is large, and there are black spots on the film, which are caused by excessive impurities and impure content of the animal oil. It should be determined according to the performance test and use of the amide during the selection process.
The choice of silica is very important. From the aspects of particle size, specific surface area, water content and surface treatment, it has an important influence on the production of masterbatch and film release process.
We Novista are the manufacturer of PVC Additives (such as CPE, Acrylic processing aids and stabilizers) for PVC films...
For more details, pls email to sales06@novistagroup.com or contact us by WhatsApp (0086 150 6536 1235)
September 03, 2021
August 10, 2024
August 02, 2024
June 12, 2020
September 10, 2024
According to the latest research report from Townsend Polymer Services & Information, a consulting firm headquartered in Houston, USA, the global plastic additives market is expected to grow at...
Properties of PVC Plastic PVC (polyvinyl chloride) is a type of plastic that finds extensive residential, commercial, industrial and military use. Comprising a wide range of materials and...
Plastic additives can be explained in terms of both general and narrow sense. The generalized plastic auxiliaries refer to all the additives added to the resin matrix during the processing of plastic...
Plastic additives, also known as plastic additives, are some of the compounds that must be added to improve the processing properties of polymers (synthetic resins) during molding or to improve the...
Email to this supplier
September 03, 2021
August 10, 2024
August 02, 2024
June 12, 2020
September 10, 2024
Send Inquiry
Mr. Ron Han
Tel:86-536-8206760
Fax:86-536-8206750
Mobile Phone:+8615336365800
Email:manager.han@novistagroup.com
Address:RM1232-1233,#4 Building No.4778 Shengli East Street, Weifang, Shandong
Related Products List
Mobile Site
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.